Club650 GMRS Repeater

The Club650 GMRS Radio Club (WQPW293) maintains several repeaters in the Southern California metropolitan area.
The tabs at the top of the page provide information on each repeater.
The repeaters are connected to each other using Radio over IP technology
The primary Club650 repeater is on Contractors Point in Sylmar California.
Users connected via any repeater will be heard on the other repeaters audio.
These repeaters are open to the public. Email:wqpw293@club650.org.

A green circle beside the repeater name indicates it is in use.


"Oh, By the way, I lie like a rug. Contractors point is the only high level repeater running at this time. And it had crappy internet to it. All the others are running, but only in garages, basements or attic spaces at very low levels.


Other Repeaters

Contractors (GMRS) Repeater

Cummings Peak Repeater

Saddle Peak Repeater

Indio Mountian Repeater

Sugarloaf Mountian

Echolink

Seton

Link Status
map: Contractors Point map 
Frequency: 467.650 MHz    PL tone up/down (Hz): 107.2/107.2    offset (MHz): -500

Sent, Recv, Missing & Erred are packet counts. Delay is in msecs

Contractors

Link Status
map: Cummings Mountian map 
Frequency: 467.650 MHz    PL tone up/down (Hz): 107.2/107.2    offset (MHz): -500

Sent, Recv, Missing & Erred are packet counts. Delay is in msecs

Saddle Peak

Link Status
map: Saddle Peak GMRS map 
Frequency: 467.650 MHz    PL tone up/down (Hz): 107.2/107.2    offset (MHz): -500

Sent, Recv, Missing & Erred are packet counts. Delay is in msecs

Indio Mountian

Link Status
map: Indio Mountian map 
Frequency: 467.650 MHz    PL tone up/down (Hz): 107.2/107.2    offset (MHz): -500

Sent, Recv, Missing & Erred are packet counts. Delay is in msecs

Sugarloaf Mountian

Link Status
map: Sugarloaf Mountian map 
Frequency: 467.650 MHz    PL tone up/down (Hz): 107.2/107.2    offset (MHz): -500

Sent, Recv, Missing & Erred are packet counts. Delay is in msecs
This site listens on 146.040 using a tone of 100, but does not transmit.
The Seton site is used for transmission, so tune your receiver to 146.640 as indicated above.

QSO Log


This table does not update automatically. Use the browser refresh to load the most current data.
Other usage includes Echolink as well.

Repeater Usage


Other usage includes Echolink as well.